Description: Heat Shrink Tube 6 Color 4 Inches Length 1 Packet

Great quality Poly-olefin Heat Shrink Tube Polyolefin Heat Shrink Tube – Top Quality Heat Shrink sleeve Polyolefin are excellent for insulation. Perfect for electrical, electronic, automotive, hobby, electrical insulation, wire bundling, color coding, mechanical protection, wire/cable joints and repairs etc. Good electrical, mechanical and chemical performance. Ideal for Hobbyists and Model Makers, Electrical, Electronic, Automotive and General Purpose uses.

Specification:

• Material: – Polyolefin
• Shrinkage Ratio: 2:1 (will shrink to 1/2 its supplied diameter)
• Minimum Shrinkage Temp: +70¡ãC
• Full Shrinkage Temp: +110 deg C
• Maximum Operating Temperature: -55degC to +125degC
• Tensile strength: 10.4 Mpa
• Dielectric strength: 20 kv/mm.

• Length=6 Inch
• Black=1.5mm
• Yellow=3mm
• Red=4mm
• Green=6mm
• Blue=10mm
• White=13mm

How to use a Heat Shrink Tube?

• Take a Heat Shrink Tube with diameter slightly larger than Cut it according to the required length.
• Use a heat source to heat up the tube for 10-20 seconds.
• You will notice the Heat Shrink tube shrinking down and upon completion it will hold the wire firmly. In market, 2 types of HeatShrink Tubes available. Polyolefin HeatShrink Tube 1. Material- Polyolefin 2. Feels like rubber. 3. Does tubes don’t get cracked with time
• Works best for insulation.
• Is being used in military, aerospace and railway industries.

Package Include:

• 1 x Heat Shrink Tube 6 Color 4 Inches Length 1 Packet

• Size: 1.5mm,3mm,4mm,6mm,10mm,13mm
• Material: – Polyolefin
• Shrinkage Ratio: 2:1 (will shrink to 1/2 its supplied diameter)
• Minimum Shrinkage Temp: +70¡ãC
• Full Shrinkage Temp: +110 deg C
• Maximum Operating Temperature: -55degC to +125degC
• Tensile strength: 10.4 Mpa
• Dielectric strength: 20 kv/mm.
• Length=6 Inch
• Black=1.5mm
• Yellow=3mm
• Red=4mm
• Green=6mm
• Blue=10mm
• White=13mm

• #multi plug

• #multi plug