Description: Soldering Tip Or Bit 900M-T-K Gold Color For Soldering Iron & Soldering Stations Professional Uses Purpose

The Antai letter welding head adopts imported oxygen-free copper as raw material, processing size is accurate, fast heat conduction

Used in almost sodium electrical grades m technology first, with super anti-corrosion, anti-oxidation, welding life of more than 20,000 points.

Welding head maintenance:

• You must first put a wet clean water sponge, then drain the excess water, this capacity can make the welding head have the best cleaning effect.If you use a damp sponge, it can damage the welding head and not cause tin.

• The next weld can weld the head in order of protection and reduce the rate of oxidation.

• The thermostat is approximately 250 first, and then cleans the welding head, plus a new tin protection layer.(If you use the temperature control welding machine, turn off the film first, let the temperature of the welding head be slightly lower after the can.

• A . Try using low temperature welding
• The high temperature can accelerate the oxidation of the welding head, reduce the life of the welding head.If the temperature of the welding head exceeds 470, its oxidation rate is twice as large as 380.
• B. The pressure is not too great
• When welding, the pressure is not too large, otherwise deform the welding head, as long as the welding head can be fully in contact with welding joints, heat can pass, in addition to choosing the appropriate welding head , can also help heat transfer.
• C. Often keeps the head of tin soldering iron
• It can reduce the oxidation of the welding head opportunity, make the welding head more durable.After use, it should be slightly lower after adding new head temperature welding, make the tin layer have a better oxidation effect
• D. Keep the welder clean, clean the rust in time
• If the welder head with black oxide, the tin welding head cannot be fulfilled, at this time it should be cleaned immediately, when cleaning the first thermostat of the welding head at approximately 250, and then cleaning with an iron head of clean sponge, and then in the can, repetitive movements, oxides directly to clean.
• E. Choose under active flow
• High or caustic active flow when the Accelerated Corrosion on the welding head is heated, so you must choose under corrosive flow.
• Note: Do not use sandpaper or hard and clean welding head.
• F. The Welder on the received weld iron support must carefully put the iron weld steel shelves at the right time. to avoid collisions and damage to the welding head.
• The tip of the trumpet blade, than the welding tip of the conventional 900M-TK blade, is smaller

Package Includes:

• 1 x Soldering Tip Or Bit 900M-T-K Gold Color For Soldering Iron & Soldering Stations Professional Uses Purpose

• DIY Supplies: Electrical.
• Type: Combination
• Application: Computer Tool Kit
• Type: Hand Tools
• Made of high-strength and heat-resistant copper for durable use.
• It has high safety and stable performance.
• Strong corrosion resistance.
• Outer Diameter: approx. 6 mm
• Inner Diameter: approx. 4 mm
• Temperature Range: 200-480 degree