Descriptions: MAX6675 K Type Thermocouple Module

MAX6675 Circuit DC 3-5V MAX6675 Module With K Type Thermocouple Temperature Sensor Thermocouple Sensor MAX6675 Module + K Type Thermocouple Sensor

MAX6675 K-Type Thermocouple Temperature Sensor Temperature 0-800 Degree Module Adapters

MAX6675 K Type Thermocouple Module Temperature Sensor Temperature Can Be Measured 0-800 Degrees Adapters

This temperature sensor and module makes use of the Maxim MAX6675 K-Thermocouple to digital converter IC to provide a microcontroller compatible digital serial interface (SPI compatible) to provide accurate temperature compensated measurement of the supplied K-Type thermocouple sensor. It has a 12 bit resolution providing temperature readings from 0°C to 1024°C (max temperature of supplied sensor is 450°C) with a resolution of 0.25°C. Screw terminals allow for connection to the thermocouples spade connectors and a 5 pin standard 0.1″ header provides an interface to a microcontroller such as an Arduino development board.

Features:

• 1. Simple SPI serial port temperature value output.
• 2. The temperature measurement range from 0C to 1024C, and the temperature resolution of the converter is 0.25C.
• 3. On-chip cold junction compensation.
• 4. High impedance differential input.
• 5. Thermocouple disconnection detection.
• 6. The operating voltage range is wide from 3.0 to 5.5V, and the operating current is 50mA.
• 8. The working temperature range is -2085.
• 9. ESD signal 2000V.
• Module interface: GND VCC SCK CS SO
• Supply voltage: 3~5V DC
• Module size: 15mm*25mm
• Shipping List:
• MAX6675 Module x 1
• Type E Thermocouple x 1

Specs:

• Thermocouple temperature range: 0 to 450 °C
• Module sensor temperature range (°C): 0 to 1024
• Temperature resolution (°C): 0.25
• Module supply voltage: 3 to 5.5 V
• Module current: 50mA
• Module interface: Serial (SO, SCK, CS) 16 bit SPI compatible
• Termocouple accuracy (0-700°C): 8 LSBs
• Termocouple disconnect detection

Note:

• Manual measurement, with small error. Please check size in detail before purchase.
• Real colors may slightly differ from the pictures, as it depends on specific monitor settings and light brightness.

#MAX6675 #5Volt #KTypeThermocouple #Thermocouple #5V #3V #Circuit #KType #Voltage #ThermocoupleSensor #arduinoUno #Uno #TemperatureSensor #Temperature #Module #DCCircuit

• 1. Simple SPI serial port temperature value output.
• 2. The temperature measurement range from 0C to 1024C, and the temperature resolution of the converter is 0.25C.
• 3. On-chip cold junction compensation.
• 4. High impedance differential input.
• 5. Thermocouple disconnection detection.
• 6. The operating voltage range is wide from 3.0 to 5.5V, and the operating current is 50mA.
• 8. The working temperature range is -2085.
• 9. ESD signal 2000V.
• Module interface: GND VCC SCK CS SO
• Supply voltage: 3~5V DC
• Module size: 15mm*25mm
• Shipping List:
• MAX6675 Module x 1
• Type E Thermocouple x 1