Picture of MODULE ULN2003 ULN-2003 2003 DC 5V 12V Stepper Motor Driver For Arduino 28BYJ-48 Stepper Motor Drivers 3D Printers Parts DIY
Picture of MODULE ULN2003 ULN-2003 2003 DC 5V 12V Stepper Motor Driver For Arduino 28BYJ-48 Stepper Motor Drivers 3D Printers Parts DIY

MODULE ULN2003 ULN-2003 2003 DC 5V 12V Stepper Motor Driver For Arduino 28BYJ-48 Stepper Motor Drivers 3D Printers Parts DIY

Category: Building Materials
SKU: UDBD04494
Seller: Udvabony BD
Visa/Mastercard 10% Discount(T&C)
Nagad 10% instant Cashback(T&C)
Tk 83
Tk 98
Tk 98
15% OFF
0 review(s)
  • ULN2003A motor driver chip
  • Chip all the pins already leads for easy connection to use
  • DC 5-12V power supply
  • 4-way signal indicator
  • Step angle: 5.625 x 1 / 64
  • Reduction ratio: 1 / 64
  • Phase: 4
  • Current / Phase: 5V

Call For Order : 09613-800800

Description: High Power ULN2003 DC 5v 12v Stepper Motor Driver Board Test Module

The ULN2003 stepper motor driver board allows you to easily control the 28BYJ-48 stepper motor from a microcontroller, like the Arduino Uno. One side of the board side has a 5 wire socket where the cable from the stepper motor hooks up and 4 LEDs to indicate which coil is currently powered. The motor cable only goes in one way, which always helps. On the side, you have a motor on/off jumper (keep it on to enable power to the stepper).
  • ULN2003 driver board use high power chip for driving stepper motor. Stepper motor with a standard interface, when used directly pluggable
  • Increased output expansion interface. Drive Module Board Size(in): 1.37×1.18×0.6
  • A, B, C, D four-phase LED indicates the status of the stepper motor work
  • Can be used for ordinary ULN2003 chip driver, connect to the 2 phase , support the development board, With convenient use, direct docking
  • A, B, C, D light-emitting diode instructions four-phase stepper motor work with the state of the standard stepper motor interface, can be used directly plug. Package included 5 set Motor Driver Board

Features:

  • Using ULN2003 high-power Darlington chip-driven stepper motor
  • Increased output expansion interface.
  • A, B, C, D light-emitting diode instructions four-phase stepper motor work with the state of the standard stepper motor interface, can be used directly plug.

Specifications:

  • ULN2003A motor driver chip
  • Chip all the pins already leads for easy connection to use
  • DC 5-12V power supply
  • 4-way signal indicator
  • Step angle: 5.625 x 1 / 64
  • Reduction ratio: 1 / 64
  • Phase: 4
  • Current / Phase: 5V





  • ULN2003A motor driver chip
  • Chip all the pins already leads for easy connection to use
  • DC 5-12V power supply
  • 4-way signal indicator
  • Step angle: 5.625 x 1 / 64
  • Reduction ratio: 1 / 64
  • Phase: 4
  • Current / Phase: 5V
Customer Questions and answers :

Login to ask a question