Description: DC 3v to 6v Submersible Pump
Micro DC 3-6V Micro Submersible Pump Mini water pump For Fountain Garden Mini water circulation System DIY project. This is a low cost, small size Submersible Pump Motor which can be operated from a 3 ~ 6V power supply. It can take up to 120 liters per hour with very low current consumption of 220mA. Just connect tube pipe to the motor outlet, submerge it in water and power it. Make sure that the water level is always higher than the motor. Dry run may damage the motor due to heating and it will also produce noise.Specifications:
Operating Voltage : 3 ~ 6VOperating Current : 130 ~ 220mAFlow Rate : 80 ~ 120 L/HMaximum Lift : 40 ~ 110 mmContinuous Working Life : 500 hoursDriving Mode : DC, Magnetic DrivingMaterial : Engineering PlasticOutlet Outside Diameter : 7.5 mmOutlet Inside Diameter : 5 mmNote:
When diving the water pump into the water, the water level is higher than the pump.The low level of the water will cause the temperature too high, so the noise of the pump will be large.Land use need to allow water to flow into the pump (non self priming pump), the installation of water level higher than the pump.To keep the water clean, so as not to block the pump rotor. the pump should be cleaned regularly to keep the pump clean.There may be 1-3mm of size deviation due to manual measurement.There may be a little color difference due to display pixel and light.Package Include:
1 x DC 3v to 6v Submersible Pump- Operating Voltage : 3 ~ 6V
- Operating Current : 130 ~ 220mA
- Flow Rate : 80 ~ 120 L/H
- Maximum Lift : 40 ~ 110 mm
- Continuous Working Life : 500 hours
- Driving Mode : DC, Magnetic Driving
- Material : Engineering Plastic
- Outlet Outside Diameter : 7.5 mm
- Outlet Inside Diameter : 5 mm
Customer Questions and answers :
Login to ask a question